Find Out How To Anchor Bounce Houses On Different Surfaces

The anchoring of bounce houses is important for the safety and health of kids, so every parent should take it seriously. To prevent an inflatable jump house from being blown around by strong winds, it must be fixed to the ground firmly.

Rental companies for bounce houses (commercial grade) are responsible for installing bounce houses. It is crucial to understand how to properly anchor your own (residential grade) if you decide to purchase one and own it for yourself. Bounce House Rentals Midlothian, if you are from Midlothian.

What is the best way to anchor a bounce house?

Keeping your bounce house secure is by installing long metal stakes in the grass or dirt that are hammered properly and completely. Whenever your bounce house or inflatable obstacle course needs to be anchored on asphalt or cement, the best option is to use sandbags of the appropriate weight.

Grass:

Moonwalks should always be mounted on grass or lawn, as that is the most suitable and recommended surface.

This is due to the following reasons:

  • Stakes are easier to use on grass.
  • If a child falls out of a bouncer, the grass will be soft enough.

It’s possible to attach anchors to bounce houses either before or after they’ve been blown up. Bouncy houses are made with nylon straps and D-rings. Be sure, when attaching ground anchors to straps, to hook them tightly into the D-rings. Also, be certain to adhere the ground anchors deeply into the earth.

Steel stakes are a better choice for ground stakes. It is possible to buy stakes in different constructions, such as J hooks, straight without stoppers or twisted pins. If you need to nail stakes, use tools such as a hammer and a crowbar.

In addition to stakes, sand bags and water bags are popular alternatives. It is probably safer for children to use them because they are heavy. The anchors underground would cause kids to trip as they ran around the bounce house.

Concrete

You can set up bounce houses on many types of concrete, including asphalt, cement, and hardwood floors.

This situation does not seem to call for the use of ground stakes. To secure the bounce house, we use sandbags, waterbags, concrete blocks or cement holders.

In order to prevent kids from falling out of the bounce house, the concrete should be flat.

Set the bouncer up inside, and wind won’t be an issue. However, the bounce house still needs to be secured as the kids might slide off of it.

When anchoring bounce houses to concrete, what should you do?

When the area is relatively flat and solid, you can set up a bounce house on concrete. To protect the bounce house from rubbing against the concrete and wearing thin, we recommend putting a tarp below it. Anchor the bounce house in place with sandbags, water bags, or concrete blocks.

Bounce houses can be left outside, but what if it rains?

Water can absolutely damage your blower, so you need the blower to keep your bounce house inflated. Don’t let the blower come into contact with water. Whenever it looks like it will rain or get wet, place it on a porch or in a sheltered area.

Comments are closed.